5L 10L 20L Stainless Steel Vacuum Chamber 1.5 Gallon Defoaming Barrel for Epoxy Resin AB Glue 20x20cm |

5L 10L 20L Stainless Steel Vacuum Chamber 1.5 Gallon Defoaming Barrel for Epoxy Resin AB Glue 20x20cm |

Note: If you need to buy 10L or 20L, please contact online customer service.

Feature:

1.Stainless steel chamber with welded handles for long-term air-tightness performance. (typical through-hole handles might lead to leakage after long-term operation)

2.Our chamber has a rounded edge at the top, for the protection of silicone gasket.

3.Vacuum gauge is assembled on a separate port, so that the reading remains accurate even while pumping/venting the chamber.

4.Gauge reading in both inHg and Mpa.

5.All kits are vacuum tested for 24 hours before packaging. (leakage less than 2.0 inHg  24 hours)

6.Two-sided flippable vacuum gasket for better durability and reliability.

7.The gasket is chemically resistant to butane and other solvents.

8.1/2" thickness Polycarbonate lid is light-weight, but 30x tougher than Acrylic.

9.Strong elastic food grade silicone vacuum hose can connect/disconnect easily with the pump/chamber.

10.50um air filter on the vent valve to reduce air flow and prevent any dust/powder flowing into the chamber.

11.Easy to install and low-cost to maintain: the chamber can be assembled in 5 minutes. 

12.Please note the package will only include the chamber.

Specification:

5L Vacuum Chamber:

Vacuum Chamber: Stainless steel, 20 x 20cm (7.87"X 7.87"), with welded handles, 1.5 Gallon

Lid: 1/2" thickness, Acrylic

Vacuum Gasket: silicone, resistant to Butane and other solvents.

Vacuum Gauge Assembly: 0.5 inHg accuracy.

Valve Assembly: very high quality air-tight brass valves, with 50um filter on vent port

Vacuum Hose: 3.3' / 1 meter food grade collapse-proof silicone hose, 3mm wall thickness (8mm I.D, 14mm O.D)

Vacuum Pump Adapter: 3/8 awning hose barb to 1/4 SAE flare port

Accessories: 1 x PTFE tape

Volume: 5 Liter / 1.5 Gallon

Net Weight: 4 kg