Ultrasonic straight probe SIUI2.5Z10N horizontal plug-in flaw detector metal UT non-destructive testing | Обустройство дома

Ultrasonic straight probe SIUI2.5Z10N horizontal plug-in flaw detector metal UT non-destructive testing | Обустройство дома

Ultrasonic probes are mainly divided into: straight probe, oblique probe, with curvature probe, focusing probe, surface wave probe, immersion probe, double crystal probe, thickness probe, high temperature probe, etc.A single wafer probe is used for vertical flaw detection. The ultrasonic generated by a straight probe is a longitudinal wave acoustic beam perpendicular to the surface of the probe.

The ultrasonic straight probe has very high gain and very good resolution on a smooth surface. The probe with protective film is not suitable for detecting objects with sharp edges.A straight probe with a replaceable protective film, even on rough or slightly curved surfaces, has stable coupling characteristics due to the flexible anti-wear protective film. If the protective film is replaced promptly, the wear of the probe can be minimized.The protective film of ultrasonic probe can be divided into dura and soft film.

Scope of application: vertical wave probe series is mainly used for longitudinal wave defect detection of bar, plate, forgings and castings.

The longitudinal wave probe specifications are as follows:

Probe type

Frequency（MHz）

Wafer Size

Low frequency straight probe

0.2—0.5P

Φ6 Φ8 Φ10 Φ14 Φ20 Φ24 Φ30

Straight probe

1—5P

Φ6 Φ8 Φ10 Φ14 Φ20 Φ24 Φ30

High frequency straight probe

6—10P

Φ4 Φ6 Φ8 Φ10

Remarks：Can also provide various specifications of soft protective film probe