BT30 4.5KW Automatic Tool Change ATC Air Cooled Spindle Motor 24000RPM 220V / 380V CNC Router Woodworking+Tool Holder+5.5KW VFD |

BT30 4.5KW Automatic Tool Change ATC Air Cooled Spindle Motor 24000RPM 220V / 380V CNC Router Woodworking+Tool Holder+5.5KW VFD |

1) This spindle is built-in type spindle motor, built-in three asynchronous motors,by the inverter control.As the spindle has a compact structure,high power, big torque, small vibration, low noise characteristics,so it can achieve high speed,high powe cutting,high precision and high stability operation.

2) The bearing of spindle use grease lubricated angular to contact bearings,can be achieved lifelong lubricating within the life cycle.

3) The spindle use forced coolling mode to coolling motor,front and rear bearings.Coolant flow through the reasonable arrangement cycle watercourse of the spindle body,thus can take the heat generated of the spindle rotation speed, to achieve thermal equilibrium,let spindle temperature within a certain constant value. External cooling device effect:maintaining a constant temperature of the coolant.

4) The spindle built-in PTC 140 temperature sensor(Technical parameters are visible in other sections of this specification),you can read it anytime if you need to protect the motor temperature.

5) The tool clamping methods:this spindle built-in automatic tool change device,shank form is BT30.

Wiring:

Power supply, Fhermal, Fan

Proximity switch and push button switch：

Details:

5.5KW Fuling VFD INVERTER

Feature:

It could adapt to the dust working environment.

Output frequency: 0-1000hz

Configuration:

Brand Name:Fuling

Power: 5.5kw 220V (or 380V)

Rated output current:23A

Output voltage: 3phase AC220V

Input voltage: 1phase  AC220V

Frequency: 0-1000HZ