Engraving machine spindle motor 45 carbon steel ER11 3mm spring collet chuck Accuracy for CNC milling tool holder | Инструменты

Engraving machine spindle motor 45 carbon steel ER11 3mm spring collet chuck Accuracy for CNC milling tool holder | Инструменты

Specifications:
Material: 45 carbon steel
Total height: 18 mm
Outside diameter (max.): 11.5 mm
Gripping area: 3 mm

Installation:
- Insert the chuck into the pressure cap and carefully turn the clamping spring when the eccentric part of the pressure cap is inserted in the groove of the clamping spring. Press the pressure cap along the direction of the arrow and with equal force on the clamping spring.
- Put the clamping spring and the cap together on the chuck body or the spindle. Insert the tool into the clamping opening after wiping the cylindrical shank and tighten the pressure cap with a wrench until the tool snaps firmly into place the clamping spring)
- Loosen the pressure cap with a wrench and remove the chuck or tool. Remove the tool. Press out the clamping spring along the direction of the arrow. Then replace the other spring as needed.

Package included:
1 x ER11 Collet

Notes:
1. Manual measuring, please allow 1 ~ 3mm error,thank you.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.