ShenzhenMaker Store 4.2inch E-Ink Display Module 400x300 E-paper Yellow Black White SPI No Backlight. low consumption | Компьютеры и

400x300, 4.2inch E-Ink display module, yellow/black/white three-color 400x300, 4.2inch E-Ink display module, yellow/black/white three-color, SPI interface Overview

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Operating voltage:  3.3V~5V   Interface: 3-wire SPI, 4-wire SPI Outline dimension: 103.0mm × 78.5mm Display size: 84.8mm × 63.6mm Dot pitch: 0.212 × 0.212 Resolution: 400 × 300 Display color: yellow, black, white Grey level: 2 Full refresh time: 15s Refresh power: 26.4mW(typ.) Standby power: <0.017mW Viewing angle: >170° Interface   SYMBOL DESCRIPTION VCC 3.3V~5V GND Ground DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data/Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output, low active

Photos

 

 

Development Resources

Wiki : www.waveshare.com/wiki/4.2inch_e-Paper_Module_(C)

 

PACKAGE CONTENT 4.2inch e-Paper Module (C) x1 PH2.0 20cm 8Pin x1