MT-2300plus 3.5 inch color TFT-LCD (touch screen) Multi-functions Optical Time Domain Reflectometer Upto 28dB High Dynamic Range |

MT-2300plus 3.5 inch color TFT-LCD (touch screen) Multi-functions Optical Time Domain Reflectometer Upto 28dB High Dynamic Range |

Optical Fiber Tester with MT-2300 Plus  Hand-held optical time domain reflectometer   

​

Hand-held optical time domain reflectometer                           

Model: MT-2300 Plus

 ● 3.5 inch color TFT-LCD (touch screen)

 ● Applicable fiber: SM

 ● Up to 28dB High Dynamic Range

 ● Flexible measurement mode switching

 ● Memory capacity >800 traces

 ● Traces fixed function mode for comparison with reference waveforms

 ● Provides multiple "multi-wavelength analysis" functional modes for multiple trace comparisons

MT-2300 hand-held optical time domain reflectometer is a high-performance, cost-effective optical network analysis barrier tester, with a lightweight, easy to use, highly intelligent, single-key automatic fast test and other notable features. The instrument is small, light weight, powerful, battery-powered. Easy to operate interface, touch screen and key panel can be achieved on the operation of the OTDR to meet the operating habits of different testers.

Features:

●Display: 3.5 inch color TFT-LCD (touch screen)

●Rugged design, light weight and easy operation

●Single mode: 1310/1550 n

●Dynamic range: 30 / 28dB (can test about 80 km)

●Automatic measurement mode: 1310/1550 nm dual wavelength can be tested simultaneously

●Applicable fiber: SM

●<8m extra-short event dead zone

●Wavelength: 1550nm

●Up to 28dB High Dynamic Range

●Distance Range: 4,8,16,32,64,128,256km

●Pulse with: 10,30,80,160,320,640,1280,5120,1024ns

●Traces fixed function mode for comparison with reference waveforms

●To achieve the automatic naming of the measurement file, automatic storage operation, simplifying the use of the operator program 

●USB interfaces, supporting USB stick and printer and direct cable download to PC via ActiveSync

●Provides multiple "multi-wavelength analysis" functional modes for multiple trace comparisons

●Memory capacity >800 traces

●Built-in friendly-environment lithium battery with high capacity for over 8 hours of operating life

Specifications:

Note: 1. Technical specifications describe the guaranteed performance of the OTDR when a typical UPC connector is used for measurement. The uncertainty caused by the reflection ratio of the optical fiber is not considered. The MT-2300 is measured when the measuring range is 120km. the pulse width is 2560 ns, and the average time is 3 min.

2. Dead zone measurement conditions: The reflection event occurs within 4 KM. The reflection strength is smaller than -45 Db. The minimum pulse width is used.