1PCS 40A 12V-48V ZVS High Frequency Induction Heating 1800W Machine Module Flyback Driver Heater DIY | Инструменты

1PCS 40A 12V-48V ZVS High Frequency Induction Heating 1800W Machine Module Flyback Driver Heater DIY | Инструменты

1Pcs 40A 12V-48V 1800W ZVS Induction Heater Flyback Driver Heater DIY High Frequency Induction Heating Machine Module

Specification:

Input Voltage: 12V-48V (Recommendation: above 36V)

Power Requirments: Less than 12V >=10A, More than 15V >=15A

Maximum Power: 1800W

Maximum Current: 40A

Heater Inner Ring: 70mm / 2.8in

Note:

1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.

2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.

3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.

4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.

5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.

6. Do not empty the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.

7. It is recommended to use a 36V 20A power supply. Below 12V is very dangerous. When the voltage is lower than 12V, it will cause the two MOSs to be turned on at the same time, and the MOS tube will be burned off

Package Included:

1 x  Induction Heating Machine 

1 x Copper Tube