ROCKET LED Mini Programming Card Program for 80A 540 PLUS ESC Speed Controller | Игрушки и хобби

ROCKET LED Mini Programming Card Program for 80A 540 PLUS ESC Speed Controller | Игрушки и хобби

Programme card Appearance description : 1. Initial Start Force : 5% , 13% , 21%, 29% (default value 5%).
2. Low Voltage Cut-off : The function is mainly to prevent the lithium battery pack from over discharging . When usinglithium battery pack , please set the suitable v alue for low-voltage protection as your like. WARNING : Never use thedefault value "non-protection" for lithium battery! 3 / 1V, 3/3 , 2/9V (default value 3/1V).
3. Initial Drag Brake Force: 100%, 90%, 80%, 70% (default value 100%)
4. Maximum Reverse Force: 50%, 75%, 100% (default value 50%).
5. 3 Start Modes ( Also called "Punch" from "soft" to "very aggressive" (default value Medium).

PROGRAMME CARD METHOD
1. Connect BEC Wires With the program car then turn on the ESC.
2. The Blue LED flashes for 2 times then LED off , that is , the connecting proaram car with ESC is successful , and the RedLED on presents the current value of that item . Otherwise , the connecting is failed.
3. Please press the Key "↓" to select different programs
4. Please press the Key "→" to select different value of the current program.
5. Please press the Key "program" to confirm above selections , the Blue LED on immediately and has gone out within 5 seconds , that is , this process is successful.
6. Please press the Key "Reset" to reset the factory setting.
colour: red + black
Material: composite material
Size: 90x50x20mm

Package Contents:
1 x programming card

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.